Installing Components and Final Details

23

1 2
Share.

About Author

  • Richard Cooke

    I am having trouble finding a skylight like the one you installed. Can you tell me what vendor you sourced it from?
    Thanks,

    • ryan_teardropbuilder

      I got it on ebay from a seller called “customrvwindows”. They have a ton of options and their selection is always changing. Here is a link to their web store.

      http://www.auctiva.com/stores/viewstore2.aspx?id=1640272&styleid=12

      • ukewarrior .

        Excellent ! I was hoping that was the case. Now I can start trolling ebay for a surplus window.

  • ukewarrior .

    Is the skylight a special window or just a non-opening RV window? Is sure looks like a standard RV window.

    • ryan_teardropbuilder

      It is a picture window originally intended for an RV, not sure what type exactly as it was a surplus part of some sort. It was intended to be installed lengthwise vertically as it has weep holes on one end that I had to seal.

      The key thing to look for is that it comes with an included trim ring, and that the trim ring matches the thickness of wall you are installing it into.

  • Preston Broussard

    I must say Ryan, this is spectacularly beautiful! Stumbled across this on reddit and just went through every picture of the build. So amazing and inspiring. What was your skill level of carpentry going into this may I ask?

    • ryan_teardropbuilder

      Thank you very much! My skill level was fairly low at the very beginning. My buddy Ed who gave me access to his woodworking shop thought I was a bit crazy for tackling such a large project. At one point he suggested that I start out with an end table or something instead. Undeterred I continued on, but it was only because of my extensive planning beforehand and Ed’s woodworking knowledge that I succeeded.

  • Bob Mesenbrink

    Ryan, Thank you so much for providing such detailed plans. Your construction skills have set the bar high! I’ve never used a teardrop, but see that some galleys have a pull-out stove, water tanks, and even a sink. I’m curious how the galley in your design works without the built-ins. Do you keep a stove and water tank in the cabinets or vehicle, and then just set them up separately? Curious about your thoughts on both design and use of galley, with respect to built-ins.Thanks.

    • ryan_teardropbuilder

      At first the extras like a sink, refrigerator, or a built in stove sounded like a great idea, but looking a bit more closely and reading about others who have them we decided they would be more hassle than they are worth. The galley with its limited space we wanted to maximize what we could do with it. Water tanks, sinks, pipes, really get in the way while providing limited functionality, not to mention cleaning.

      In our setup we have a space for a cooler or water tank in the lower right section under the counter. It was built to the specific size of a cooler so it fits perfectly. In the cabinets there is a shelf for our slim Coleman stove which we pull out and place on a side table. I am happy that we did this since grease tends to splatter and if it were in the back of the galley surrounded by wood you could imagine the problems that would cause. On this table we sometimes put a container of water to wash pots or hands that drains onto the ground. If this were in a tiny sink you wouldn’t be able to do this easily.

      In the end we went with functionality vs style and ultimately what works for us, but everyone uses their teardrops differently and may disagree. There is no one right way, and that’s the great thing about these custom teardrops!

      • Bob Mesenbrink

        Thanks for the reply, Ryan. There is a lot to be said for simplicity. With limited space, I can now see that it would be easier to pull out the stove and tub and set up a table, and keep more cabinet space for pots and pans and pantry items.

        I’ve started my build. Mostly just gathering materials at this point. But trailer arrives here in Denver next week…

  • J Lind

    Beautiful work! How is the trailer holding up? Anything you’d do differently?

    • 3 camping seasions and 6,000 miles later and not one problem so far! The only thin I would do differently would be to make the hatch a bit lighter, the struts don’t work 100% on cold mornings.

  • Eddie N Amber Fulton

    Where did you find the little camper side door?

    • I ordered the door from Frank at Vintage Technologies.

      http://teardroptrailerparts.com/Windows___Doors.html

      • What size trim rings did you order on the doors? Also, what about the stargazer window?

        Also, I assume these are WD11 on the Vintage Technologies site?

        • I ordered 1″ trim rings for the doors, they were the 36″ x 32″ ones. The window was 40″ x 12″ off ebay and I believe the trim ring was 1 1/4″ for that.

          • Thanks Ryan. Not sure if they offer that window with the 1 1/4 trim ring. Are they flexible enough to cut down to size if you order bigger than what you need?

          • Usually modifying a trim ring is pretty difficult. You should send Frank at Vintage Technologies an email and see what he can do about a custom trim ring, he was pretty good at responding to my questions. Good luck with your build!

  • M McElhaney

    Amazing camper. Where did you purchase the rear stabilizer jacks? I can’t seem to find anything like those out here. Thanks.

    • I bought them from a local RV store. They are actually very common, google “Atwood Stabilizer Jack” and you will find tons of places that sell them online.

  • Frank Bond

    I purchased a used trailer just like the one you bought a couple of days ago. It had rails and a plywood deck on it and was used to haul motorcycles. I stripped it all down to get ready to build mine. I love your design and the trailer is really beautiful. Did you weight the trailer after it was completed? Curious to know what it came out to. Thanks!

    • Dry weight of the teardrop before any of our gear goes in is right around 1000 pounds, and 160 of that is at the tongue.

      Good luck on your build!

      • Frank Bond

        Thanks Ryan. I figured it would be around that. I will be towing mine with a 1963 Plymouth Fury so it should be perfect for it.